• Skip to main content
Phone: 860-469-2580
  • About Us
  • Manuals
    • Print Manuals
    • Video Manuals
  • Video Gallery
  • Dealers
  • FREE POSTERS
  • Press Releases
  • Contact Us
HTP-Logo
BECOME A DEALER
FIND A DEALER

Find a Dealer 2023

Name(Required)
Address(Required)
What products are you interested in?
How did you hear about us?

  • Ecommerce
  • VacuSeal
    • VacuSeal For Hot Tubs
      • Product Information
      • VacuSeal Manuals
      • VacuSeal FAQs
    • VacuSeal For Swim Spas
      • Product Information
      • VacuSeal Manuals
      • VacuSeal FAQs
  • Cover Lifters
    • Traditional Cover Lifter Selection
      • SpaEase – Cover Lifters
      • UltraLift – Cover Lifters
    • VacuSeal For Hot Tubs
    • VacuSeal For Swim Spas
    • Automatic Cover Lifter
  • ConvertaLift
    • Product Information
    • ConvertaLift Manuals
    • ConvertALift Pricing
  • Spa Covers
  • Access Rails
  • Aquatic Fitness
    • Aquasizer Treadmill
    • Aquatic Exercise Accessories
  • Filters
  • Chemicals
  • Steps
    • Classic Steps
    • Designer Steps
    • Modular Step System
  • Accessories
    • Spa Accessories
    • Fragrances
  • Hot Tubs

ConvertaLift – Will it work on my spa?

IntroHeading

Will it work on my spa?

REQUIREMENTS FOR INSTALLING A
VACUSEAL LIFTER or a SPAEASE 200 LIFTER
On a Hot Tub or a Swim Spa

  1. The radius of any spa corner where a Mounting Bracket is to be installed
    must be 16” or less. (See Fig 1)
    Radius corners from 13” to 16” require and Extension Bracket. (See Fig 2)
  2. On the side where your cover is raised you need a rear clearance of at least 7” on a SpaEase 200 Lifter and 9” on a VacuSeal Lifter. (See Fig 3)
  3. For Installing Mounting Brackets on a SpaEase 200 or a VacuSeal Lifter
    A) A flat level cabinet surface of 4” x 24” is required for proper attachment. (See Fig 4)
    B) A Side Clearance from the cabinet of 3.5” is required.
    a. For the ConvertALift the Side Clearance becomes 5”.
    C) A Clearance below the spa coping of 4” is required. (See Fig 4)
    a. For the ConvertALift the Clearance becomes 14”. (See Fig 5)

SIZE REQUIREMENTS FOR HOT TUBS

  1. For Standard Cover Sizes both sides must be 96” or less. But the “B” Side must be greater than 63”. (See Fig 6)
  2. For Spas longer than 96” but not greater than 132” (11’) a Tri-Fold Cover can be used on a VacuSeal Cover only. (See Fig 7)

SIZE REQUIREMENTS FOR SWIM SPAS

  1. The maximum width is 96” and the maximum length is 264” (8’ x 22’).
  2. If the swim spa is longer than 192” (16’) a Tri-Fold Cover is required on one or both sides. (See Fig 8)

Fig 1

CornerRadius

Fig 2

Screen Shot 2022-06-13 at 3.40.05 PM

Fig 3

vsSE200Clear

Fig 4

ClearVS

Fig 5

ClearanceCLS

Fig 6

squarecorners-spaease

Fig 7 (Tri-Fold Cover Animation for Hot Tub)

Fig 8 (Tri-Fold Cover Animation for Swim Spa)

About Us

Hot Tub Products is owned and operated by the Tournas family who have been in the hot tub industry for over 33 years.

Get In Touch!

Hot Tub Products, LLC
20 Commerce Drive
North Branford, CT 06471

860-469-2580

© 2022 Hot Tub Products. All Rights Reserved.